EFRA ottaa F1-10 luokan mukaan kalenteriin
http://news.efra.ws/fileadmin/news/2015/10/Racecalendar_2016_v4.pdf.
EC Kisat pidetään 2016 heinäkuun 14-16 EC 1:10 Electric TC, Trencin, Slovakia
WC Kisat 2016 elokuun 27-30 IFMAR WC 1:10 Electric TC, Bejing, China
Tärkeimmät säännöt on käytännössä samat kuin meilläkin - isoin ero on, että kotimaassa voi ajaa Xray tyyppisellä etusiivellä, mikä on kielletty EFRA ja ETS säännöissä. ETS säännöissä on määritelty seuraavat sallitut siivet
http://ets.redrc.net/rules/:
F1 Wings:
Only the front and rear wings from Mon-tech and Serpent that are listed below can be used.
Mon-tech:
Front Wing Black #015-006
Front Wing White #015-009
Rear Wing Black #015-007
Rear Wing White #015-008
Serpent:
Front Wing Black #411352
Front Wing White #411353
Rear Wing Black #411369
Rear Wing White #411370
Ja renkaat:
Front: Ride XR High Grip, pre-glued, RI-26030
Rear: Ride XR High Grip, pre-glued, RI-26031
http://news.efra.ws/fileadmin/news/2015/10/2015%20%20Electric%20All%203%20Sections%20Minutes%20Final%20PW.pdf8. Particular to 1/10 Formula One Spec Cars
8.1 Cars specification
Maximum width: 190mm
Front independent king pin, coil spring suspension is allowed. Suspension pick up
points must be mounted inside the body. Independent front shocks are not allowed
The main chassis plate must not protrude from the body when viewed from above
Minimum weight = 1050 grams including personal transponder
8.2 Tires:
The tires will be decided by the section chairman early in the season and will remain
in use for a minimum of one year. Tires can be warmed up with the appropriate
equipment. Amended: Tyres to be chosen as per. Touring Car procedure for
selection (Rubber type tyres, no foam)
8.3 Additive:
only odorless additive is allowed (as per. rules)
8.4 Bodies:
Only Formula 1 body styles are allowed. Body must be painted in a race inspired
theme. Single color themes are allowed but you must the included sticker sheet to
detailed the car.
All cars must have a drivers figure installed in the cockpit.
8.5 Wings:
Front and rear wings must be made of a molded ABS Style plastic similar to a Tamiya
Style wing. Front and rear wings made of Lexan material will not be allowed (this
includes bolt on Lexan front wings over a smaller ABS plastic wing). Wings equipped
with any type of remote adjustment or DRS are not allowed.
8.6 Motor and Speed Control:
The combo (motor + esc) will be decided by the section chairman early in the season
and will remain in use for a minimum of two years. The criteria for the choice of
motor and esc are:
• quality of the product
• performance of the product
• affordable price motor
• availability of the product
AMEND 8.6: Delete proposed motor & speedo rules. Motor and speed controller
rules to be same as current Spec. Touring Car, but with 21.5 T Spec. motor
Remarks: Suggestions for the technical specification for the new proposed F1 class. To be
enhanced/adjusted based on further requirements and details