tällä ohjeella pakki napsahti päälle.
Step 1. Turn the transmitter on.
Step 2. Hold the ESC setup button in and keep it held on.
Step 3. Turn on the ESC at the switch.
Step 4. As soon as the ESC powers up (LED lights up), release the setup button (within 3 seconds of turning on the ESC).
These steps will toggle it both on or off.
To check which mode is enabled: If the LED on the ESC flashes once when it's turned on, then reverse is enabled. If the LED on the ESC flashes twice when it's turned on, then reverse is disabled